CERAMIC TILE GROUT USA DISTRIBUTOR | Stain Resistance | Anti-mould | Waterproof

P-20 TDS Epoxy Grout.pdf Download

 

 

^{If you are householder, have you boring about mildew and bacteria come from the joint gap of ceramic tile, the appearance looks dirty, ageing, it very hard to clean. Traditional cement grout has short service life, If the grout in tile joint is exposed for a long time, it will become black and dirty, long-term humidity will mildew and grow bacteria endangering the health of family members. You need ask worker to clean your ceramic tile floor and wall in short time, the stain hides in the seam and difficult to clean. Even epoxy cement grout is very hard to mix and construct.}

^{If you are a traditional tile grout construction worker, are you tired of hard, complicated and messy working? Mix the grout, scrape time seam filling by tile grout, and clean it hardly again and again.}

^{If you are a traditional tile grout distributor, are you worried that the profit of traditional tile grout is too low and the business is difficult to continue?}

 

^{PERFLEX Tile Grout is a revolutionary new product perfectly solve all the problems of traditional cement-based grout such as fall off, get mould and dirty, bacteria breeding inside ceramic tiles joints.}
 

 

 

 

^{GLITTER Epoxy Tile Grout P-20 is a two-component epoxy joint grout, made of high-tech polymer epoxy resin, hardener, high-grade pigments and additives. It is a semi-fluid liquid, packed into two-component plastic cartridge packaging, it can easily operate by automatic caulking gun, no need mix before operation. Epoxy Grout P-20 has luster, rich, natural delicate color, such as gold, silver, pearlescent, especially white and black color is significantly higher than cement grout, which brings better overall decorative effect to the wall.}

 

 

 

^{It has high bonding strength, excellent physical properties such as non-sagging, tear/scratch/wear resistance. After curing, it is super anti-mildew, anti-bacterial, stain resistance, waterproof, moisture-proof, colorful, durable, smooth as porcelain, hard as diamond, bright as crystal, easy to clean, etc. The construction is very simple}

^{and convenient.}

                      

      

 

 

^{Perflex Epoxy Grout P-20 is suitable for bonding, filling and beautifying the joint of ceramic or stone building materials such as ceramic tile floor, ceramic tile wall, washbasin, bathtub, toilet, kitchen table, door-crossing stone, etc.}

 

 

 

 

^{1. After the mortar solidified, the ceramic tile crevice must be cleaned, the impurities and dust in the ceramic tile crevice must be cleaned up with wallpaper knife and vacuum cleaner.}

^{2. Use cleaning wax on both sides of the gap beforehand with proper amount, pay attention not to wipe wax into the gap.}

^{3. Twist the tube cap, install it on the head of the double-tube sealant, cut the spiral rubber nozzle obliquely at the head by 45 degrees (the opening size depends on the size of the tile seam), and then install it in the rubber gun.}

^{4. Extrude about 20 cm colloid (in order to mix it fully and remove bubbles), then inject the glue into the crevice of ceramic tile.}

^{5. Press the ready glue on the crevice with with the seam press or steel ball.}

^{6. After 4-24 hours (depending on the temperature), the glue cures completely, scrape off the excess glue on both sides of the gap with a scraper.}

 

 

 

Tile Size Dosage	1MM Gap Width	1.5MM Gap Width	2MM Gap Width	2.5MM Gap Width
	(sq.ft/pc)	(sq.ft/pc)	(sq.ft/pc)	(sq.ft/pc)
31.5*31.5 in	274.5	228.2	213.1	152.8
15.7*31.5 in	204.5	172.2	161.5	114.1
23.6*23.6 in	204.5	172.2	161.5	114.1
19.7*19.7 in	172.2	143.2	134.6	95.8
11.8*23.6 in	153.9	129.2	118.4	85.0
15.7*15.7 in	137.8	114.1	107.6	76.4
11.8*11.8 in	102.3	86.1	80.7	66.7
7.9*7.9 in	68.9	58.1	53.8	37.7
3.9*3.9 in	34.4	29.1	26.9	19.4
2.0*2.0 in	17.2	14.0	11.8	9.7

 

 

 

^{400ml per plastic cartridge, 20 Cartridge per carton.}

     

 

 

^{24 months if the product is stored in a dry and cool place away from light.}

 

 

^{1. The Storage of sealant should not be less than 5℃.}

^{2. Construction temperature is suitable in the range of 15-30℃, too low temperature will affect the curing time and strength.}

^{3. Impurities, dust, grease, clear water and other substances shall not be allowed during construction.}

^{4. Do not touch or trample until the sealant is completely cured.}

^{5. After use, the remaining glue can be put on the cover and can continue to use.}