抵抗力がある高い摩耗に塗るPolyasparticの支払能力がある自由な床

PF-100 Solvent Free High Abrasion Resistant Polyaspartic Floor Coating Anti-aging No-yellowing Mapei Replacement

^{INTRODUCTION: PXF-500 is a three-component reaction curing transparent floor coat made of polyaspartic resin, HDI hardener and organic micro bead materials, with special organic micro bead and multi-functional chemical, it can provide strong adhesion and substrate adhesion when overcoat on epoxy or polyurethane substrate, and super wear and scratch resistance of the coating layer. It’s has good anti- QUV properties, anti-aging and yellowing resistance and chemical resistance performance, the best choice for heavy duty vehicle flooring indoor or outdoor.} 

^FEATURE

^{APPLICATION: Typically used in light to heavy-duty traffic areas}

^{▪ Laboratories, Life Sciences, Pharmaceutical industries and Health Care industry.
▪ Education (e.g. Schools and Universities).
▪ Leisure & Culture (e.g. Museums, Stadiums).
▪ Retail (e.g. Shopping Malls).
▪ Manufacturing facilities and warehouses.}

Part D: Organic Micro Bead Materials

^{PROPERTIES AFTER CURING}

^{- BLEND RATIO BY WEIGHT
 A :  B : D = 100 : 20 : 50}
 

 ^{- WORKING TIME}

^{- CONSTRUCTION CONDITIONS} 
 

^{Construction amount: strictly control the amount in 0.05 ~ 0.1kg/m2 to avoid accumulation, otherwise the foaming is serious
Construction conditions:
Ambient temperature: 0 ℃ - 35 ℃, ambient humidity: ≤ 85%
Substrate temperature: must be more than 3 ℃ above air dew point temperature
Cleaning agent: Asparagus polyurea standard diluent
Note: this material has very high requirements for construction, and can only be operated after professional training of our company before use.}

^{- DRY TIME AND RECOAT INTERVAL
Temperature (℃) : 25
Walking opening hours (HRS): 8
Vehicle opening hours (HRS) : 2}

^{Recoat interval hours (HRS): 2}

^{The above data is only for guidance, and the real curing time is highly related to the ambient temperature and humidity.}

^{- SURFACE TREATMENT
Clean water to remove salt and other water-soluble contaminants.
Use proper detergent and degreaser to remove grease.
Clean and dry the surface before construction.
Pay attention to the painting interval between the primer and the construction.}
 

^{Storage time: 12 months
Storage temperature: 5 ℃ - 35 ℃}

^{Part A: 3kg  |  Part B: 0.6kg | Part D: 1.4kg}